sandpile.org -- discussion forum

discussion forum

message

Name:	SEXYBOY
Date:	April 22, 2004 at 05:18:39
Subject:	Re: How to work with a PLL chip?
In Reply To:	Re: How to work with a PLL chip? by unknown on April 21, 2004 at 17:31:27
Text:	`\| It's programmed through the I2C bus (SMBus) so it's going to be a tad more complicated than regular port IO. Access to it is probably through the South Bridge. \| Disassembling the BIOS might be a good starting point, especially if you want to change the CPU/PCI/AGP clocks \| See also \| http://mbprobe.livewiredev.com/FAQ.txt` `Oh, thank you for the answer! It is very interesting for we to work with SMBus. Thanks for the datasheet link, I have already got it!`

post a followup message
(Be nice... or be blocked. Be technical... or be erased.)

`Name:`		`optional link title:`
`eMail:`		`optional link URL:`
`Subject:`		`optional image URL:`
	Insert line breaks by hand when only about one inch remains at the right side. Otherwise your message will be unreadable.
`Text:`	\|\| It's programmed through the I2C bus (SMBus) so it's going to be a tad more complicated than regular port IO. Access to it is probably through the South Bridge. \|\| Disassembling the BIOS might be a good starting point, especially if you want to change the CPU/PCI/AGP clocks \|\| See also \|\| http://mbprobe.livewiredev.com/FAQ.txt \| \| Oh, thank you for the answer! It is very interesting for we to work with SMBus. Thanks for the datasheet link, I have already got it! \|


	Note: The above eMail form fields may look unaligned if you are using a browser other than Netscape Navigator version 3.0.

currently posted followup messages
(You may have to press the RELOAD button of your browser.)