discussion forum


message

Name: prino
Date: April 16, 2004 at 13:25:43
Subject: Re: disassembling
In Reply To: Re: disassembling by
unknown on April 15, 2004 at 05:47:51
Text: ||| Well Ok, equivalent HLL code can be derived from machine code, a
||| tedious process no doubt, but still possible. Arguably it won't
||| be identical to the original source, but compiled code does have
||| a pretty much direct correlation to the source it was compiled from.
||
|| If the code in question is old, then there is a chance that is was
|| compiled without aggressive optimizations. Which would make it much
|| easier to de-compile it.
|
| IDA Pro might be able to help you disassemble that program.

No, IDA Pro cannot do anything with 370/390 assembler.


post a followup message
(Be nice... or be blocked. Be technical... or be erased.)

Name: optional link title:
eMail: optional link URL:
Subject: optional image URL:
  Insert line breaks by hand when only about one inch remains at the right side. Otherwise your message will be unreadable.
Text:
 

  Note: The above eMail form fields may look unaligned if you are using a browser other than Netscape Navigator version 3.0.


currently posted followup messages
(You may have to press the RELOAD button of your browser.)



main page